Propane Tank Rules
The LP or liquid petroleum system style gas container is an OSHA term that refers to the piping, regulators, hoses, regulators, valves and fittings. The agency needs particular parts depending upon the tank's capacity. These individual components must go trough recognized laboratory testing. The right laboratory approval proves that the system parts meet pressure, thickness and construction standards.
Tank Location
The organization OSHA determines how near the propane tank could be mounted in relation to buildings, to ignitable materials, to tanks that contain inflammable liquids, cutting torches and welders. These strict regulations are implemented to make the jobsite as safe as possible for the employees and other individuals who are in close proximity.
Nameplate Marks
LP systems require that the name, the address, the supplier of the container, and or the tanks trade name, be marked on the propane container. The capacity of the container is to be listed with the following details: pounds or gallons of fuel, square foot outside surface, pressure and fill level. In addition, details about whether or not the container is designed for installation above ground or underground is also visible. These markings need to be on a metal plate attached somewhere visible to the container. OSHA requires that each and every tank should be marked by the Pressure Vessel Inspectors and National Board of Boiler so as to be considered ready and safe to use.
Tank Modifications and Repairs
OSHA also regulates any type of repairs to the LP systems, such as welding. The personnel performing repairs and the tank owners must know the regulatory codes and standards that the tanks were manufactured. Welding repairs to any part of the system that is subject to internal pressure should first follow these fabrication codes. Any other type of welding is just permitted on saddle plates, lugs or brackets.
The OSHA works hard to make certain that individuals who work with lift trucks and in their vicinity are kept safe. They have stringent rules and training procedures in place in order to make certain that these industrial machinery and their repair processes are handled as safe as possible and with respect. It is vital that companies follow their rules and steep fines could occur if they are not adhered to.